Livolo Module | Design Touch Dimmer (universal) | 1 Gang 1 Way
Livolo | Design Touch Dimmer | 1 gang 1 way | 1-pole | 1 window
How does Dimmen work?
Without telling an overly technical story, it comes down to the following:
There are two forms of dimming:
- Phase cutting dimming (Leading edge Dimming / RL).
- Phase Cutting Dimming (Trailing-Edge Dimming / RC).
Livolo Dimmers are Phase Leading Edge and the LED lamp must also be dimmed in this way. Whether the LED lamp is suitable for dimming this way, you can often find the LED lamp itself.
Possible problems with using old dimmer
It may be possible that the current dimmer is unable to completely dim the LEDs. This differs by type of dimmer. In addition, many phase-cutting dimmers have a relatively high minimum power. Be sure that the installation achieves this minimum when using LED drivers that work with phase cutting / Leading Edge .
Note: With LED lights An LED driver is used (this is in the LED lamp itself). This LED driver must therefore be able to handle a phase-cutting / Leading Edge Dimmer (such as the Livolo Dimmer).
It is wise that when you buy a Led lamp, you always need to ask for the LED Led LED channel if the LED lamp can be dimmed with a phase-cutting / leading edge dimmer; So you're sure to get the right led lamp in your house.
- TS701D Touch Switch Eclipse Dimmer
- Instruction manual
- 2 x Screws
|Type:||1 Way 1 Gang Dimmer, dims all dimmable lamps|
|Way of Dimming:||Universal|
|Minimum load:||> 5 W|
|Maximum Load :||< 500 W|
|Energy Consumption:||< 0.1 mA|
|Dimensions:||80 mm x 80 mm x 40 mm|
|Rendering:||Blue / Red LED|
|Environment temperature:||-30 To 70 ° C|
|Humidity:||< 95% RH|
|Longevity:||> 100.000 x|